Skip to article

Clash Verge on Windows 11: Beginner Setup and Subscription Guide

Set up Clash Verge on a Windows 11 PC with clear steps for installing the app, importing a subscription URL, refreshing your profile, and selecting a server. Check the connection status and troubleshoot common setup errors.

Clash Verge on Windows 11 needs two things to work: the application itself and a compatible configuration. Installing the client alone does not create a connection. You must import a subscription URL or configuration file, refresh it when needed, select a route, and verify that Windows is sending traffic through the client. The exact labels and available options can vary between Clash Verge versions, so use the steps below as a practical sequence rather than expecting every screen to look identical.

Prepare Windows 11 and the client

Before installing anything, confirm that ordinary websites load on your current network. If the network is already offline or requires a sign-in page, resolve that first; a proxy client cannot repair a disconnected Wi-Fi connection or complete every kind of captive-portal login. Also check that Windows date and time are set correctly. Incorrect system time can cause certificate and secure-connection errors that look like a subscription problem.

Obtain Clash Verge from a source you trust, such as the project’s official release channel or a distribution source recommended by your organization. Avoid repackaged installers, download mirrors that bundle unrelated software, and files shared in chat groups. Check that the application is intended for Windows and that its publisher and filename are consistent with the source. If Windows displays a security warning, do not bypass it automatically; first verify where the installer came from.

Run the installer and follow its prompts. Depending on the release, Windows may ask for permission to install or configure networking components. Grant administrator permission only when the application’s requested operation is part of the setup you intended. After installation, open Clash Verge from the Start menu. If it offers an initial setup or service installation step, read the prompt and complete it only if you plan to use the related feature.

Keep in mind that Clash Verge is a client interface and configuration manager. The subscription provider supplies the route configuration; the client uses that configuration to establish connections. A successful installation therefore does not prove that your account has an active service or that a particular subscription link is compatible. Keep your account credentials and subscription URL private: a subscription URL can function like an access credential.

  • ✅ Confirm normal internet access and correct Windows date and time before troubleshooting the client.
  • ✅ Install a Windows build from a source you can verify.
  • ❌ Do not share a full subscription URL in a screenshot, public post, or unfamiliar online converter.

Get and protect the subscription URL

Sign in to the service account and locate the subscription or client-configuration instructions. Copy the URL intended for a Clash-compatible client, if one is provided. Some services show more than one link or offer separate configuration formats. Do not assume that a link for a different application or protocol will work simply because it looks like a web address. If you are unsure which option to use, follow the provider’s current client instructions rather than changing parts of the URL yourself.

A subscription is different from a single server address. It usually lets the client retrieve a profile containing route definitions and related settings. The profile may be updated by the provider, so importing it once and refreshing it later are separate actions. Treat the URL as confidential even if it does not resemble a password. Anyone who obtains it may be able to access the configuration associated with it, depending on the service’s design.

When copying, use the provided copy control where possible and make sure you have selected the entire link. Avoid adding spaces or punctuation before or after it. If the provider offers a QR code or an import action, use the option documented for Windows rather than scanning a link with an unrelated tool. If you have already posted a subscription URL publicly, contact the provider to ask whether it can be renewed or replaced.

Clash-family configuration and protocol support are related but not identical concepts. A profile may contain proxy entries using protocols such as Shadowsocks, VMess, Trojan, or Hysteria2, but the client and its core must support the specific protocol and configuration options in that profile. Do not edit a protocol name in an attempt to make an unsupported entry work. The client must understand the actual format and parameters supplied by the provider.

Import the profile and refresh it

Open Clash Verge and look for the profile, subscription, or configuration area. The wording and placement can differ by version. Choose the action for adding a remote profile or subscription, then paste the compatible URL into the field provided. Give the profile a recognizable name if the client asks for one, such as the service name or the device for which you created it. A descriptive name makes it easier to distinguish profiles later without exposing the URL itself.

  1. Open profile management and choose the option for adding a remote subscription or URL.
  2. Paste the complete link into the address field and save or confirm the entry.
  3. Select the newly added profile and use its update or refresh action.
  4. Wait for the client to report completion, then check whether the profile or its proxy entries are visible.

If the client reports that the profile could not be fetched, first check the basics: the URL is complete, the current internet connection works, and the account has access to the service. Then confirm that you chose the format intended for a Clash-compatible client. A browser opening the subscription URL may display raw text or download a file; that behavior alone does not prove the client imported the profile correctly.

A refresh replaces or updates the local profile using the provider’s current response. If you have made local edits, check whether refreshing will overwrite them before proceeding. Keep a separate copy of any configuration you intentionally maintain yourself, but do not upload it to an unfamiliar conversion site. If repeated refreshes fail, note the exact error message and the time of the attempt, while keeping the private subscription URL out of any support screenshot.

Bottom line: A profile appearing in the client is a useful milestone, not proof that traffic is connected. Confirm that the profile updates successfully, then select a route and test the connection separately.

Select a route and choose a mode

After the profile loads, open the proxy or route-selection view. The profile may organize entries into groups, and the displayed names depend on the configuration. Select an available entry or group according to the provider’s instructions. A group may offer a choice of routes, while another profile may present individual entries. Do not infer a route’s protocol, location, or performance from its name alone; use the information shown in the client and service panel.

Next, review the client’s operating mode. Rule-based mode generally sends traffic according to rules in the profile, while global mode typically directs a broader set of traffic through the selected proxy. Direct mode is intended to avoid proxying. The precise behavior depends on the configuration and the client version, so check the interface and profile documentation. If you are new to the client, begin with the mode recommended by the provider instead of changing several routing options at once.

Some configurations can use a system proxy setting; others may offer a TUN option that routes traffic at a lower network level. These features are not interchangeable. A system proxy commonly affects applications that honor Windows proxy settings, while TUN support can cover more traffic but may require additional permissions or a networking component. If you enable TUN, follow the client’s instructions and approve only the Windows permission necessary for that setup. If you do not need it, leave it off until basic profile and route selection work.

For a practical first test, choose one route, apply or connect using the control shown in your version, and wait for the client to indicate its current state. Then open a site or application that you intend to use. Where relevant, compare the result with the client disconnected. If a site is unavailable, that does not by itself identify the cause: the selected route, application rules, DNS behavior, local network, or destination service may all affect the result.

If you are comparing client options or deciding which setup to use while travelling, the QingVPN VPN for China Travel homepage provides the service overview and platform information. Keep that decision separate from troubleshooting: first establish whether the profile is imported and the client is connected, then evaluate whether the route suits your particular application and network.

90+

countries covered

190+

routes listed

Windows

supported platform

No limit

simultaneous devices

Check the connection in Windows

Look at the client’s main connection indicator and the selected route. A connected status means the client reports an active connection, but it does not guarantee that every application is using that route. In rule mode, some destinations may be sent directly by design. A browser may also use its own proxy, secure DNS, or extension settings, which can make its behavior differ from another application.

For a basic check, make one change at a time. Confirm the profile is selected, confirm the intended route is active, and test the same destination again. If the client offers connection logs, use them to see whether requests are being processed or whether an error is reported. Logs can contain sensitive addresses or configuration details, so review them before sharing and redact credentials, tokens, and subscription data.

If you need to confirm the public IP address, use a reputable IP-checking page while connected and compare the result with the disconnected state. Treat this as a diagnostic observation, not a guarantee that all traffic follows the same path. A browser-only test does not establish how other applications are routed, especially if the client is operating in rule mode or the app does not honor the Windows system proxy.

To distinguish a client issue from a local network issue, disconnect Clash Verge and confirm ordinary browsing still works. Reconnect and repeat the same test. Avoid running multiple proxy or VPN clients simultaneously during this check: two applications may compete to change proxy settings, routes, DNS behavior, or virtual network adapters. If you need to switch clients, disconnect one cleanly before starting the other.

Troubleshoot common setup errors

The subscription cannot be added or updated

Check for a truncated URL, accidental whitespace, an inactive account, or a temporary network interruption. Confirm the link is meant for a Clash-compatible configuration and not a different client format. Retry once after confirming ordinary browsing works. If the error continues, record the client version and exact message, then ask the service provider which configuration format to use. Do not include the complete URL in the request.

The profile loads, but no route appears to work

Make sure the profile is selected and refreshed, then choose a route that is actually present in that profile. Confirm the client is not in direct mode and that the displayed connection state changes as expected. Review the profile’s recommended mode and any route-group selection. If one application fails, test another ordinary destination to determine whether the issue is limited to that app or affects the broader connection.

Windows shows a permission prompt or TUN does not start

Check whether you enabled a feature that requires a system component or elevated permission. Follow the client’s installation prompt for that feature, then restart the client if instructed. Do not disable Windows security protections or add broad firewall exceptions as a first response. If you do not need TUN, turn it off and test the simpler system-proxy approach supported by the profile.

Clash Verge says connected, but an application still uses the local route

Check the current mode and routing rules. The profile may intentionally send some traffic direct, and some applications ignore the Windows system proxy. If the client offers TUN support and your setup requires broader application coverage, consult the client and provider instructions before enabling it. Also check that another proxy application is not changing Windows settings in the background.

Connection stops after changing networks or waking the PC

Move to a known working network, then refresh the profile if the provider recommends doing so. Disconnect and reconnect the client, and check whether the selected route remains available. Avoid repeatedly changing protocol, DNS, and mode settings together; that makes it difficult to identify which change helped. If the problem persists, preserve the error text and report the Windows and client versions, but keep subscription credentials private.

  • ✅ Troubleshoot in order: local internet, profile update, route selection, connection mode, then the affected app.
  • ✅ Change one setting at a time and repeat the same test.
  • ❌ Do not post full subscription links, passwords, or unredacted configuration logs.

Once the client connects reliably, keep the profile available for future refreshes and use the provider’s current instructions when changing devices or networks. If an update changes the client’s interface, look for the same functions—profile management, route selection, mode, and connection status—rather than copying steps that depend on an old button position. This approach makes Windows 11 setup easier to maintain and gives you a clearer way to isolate problems without exposing private account information.

First Month Free